Recommended for starting UgCS users.

Can be provided by using video conferencing software.

Duration: 4 hours.

The price is for a group of up to 4 students.

Training is recommended for users of UgCS software and UgCS Integrated Systems who already have basic knowledge of UgCS.

Can be provided by using video conferencing software.

Duration: 6 hours.

The price is for a group of up to 4 students.

EchoLogger ECT D052S dual-frequency echo-sounder plus all required components and software for use with DJI M300/M600 drones (drone not included).

Echo sounder combo: ECT 400S single-frequency

EchoLogger ECT 400S single-frequency echo-sounder plus all required components and software for use with DJI M300/M210/M600 drones (drone not included).

EchoLogger ECT 400S echo sounder with tilt and temperature sensor, harness, housing, and mountings for the drone.

HS Code: 90158040 (hydrographic instruments)

Comes with an RS232 interface and connector for UgCS SkyHub.

Cable length 2.5m.

EchoLogger ECT D052S dual-frequency echo sounder with tilt and temperature sensor, harness, housing, and mountings for the drone.

HS Code: 90158040 (hydrographic instruments)

Comes with an RS232 interface and connector for UgCS SkyHub.

Cable length 2.5m.

Software package to support single and dual-frequency echo sounders.
Includes firmware for UgCS SkyHub on-board computer and companion application for UgCS.
Supported echo sounders:

EchoLogger ECT 400 (single-frequency)
EchoLogger ECT D052 (dual-frequency)
EchoLogger ECT D032 (dual-frequency)

Computer bound license (two computers maximum).

Hydromagic Survey is a professional hydrographic survey package, which can be used to map depth areas using an echo sounder.

The software is very affordable and the learning curve is very short. You can start creating your first sounding within a single day.

Only one of its kind training to learn how to perform bathymetric surveys with echo sounders integrated with a drone.

Students should have the knowledge and practical experience covered by training:

UgCS Basics
UgCS AreaScan and True Terrain Following Missions
Can be provided by using video conferencing software.

Laser Falcon is sensitive only to methane, so no false readings of other gases are possible. It is a class 3R eye-safe laser.

The concept is based on Infrared Absorption Spectroscopy. The laser emits light (spectral range of 1,65 μm), which reflects back and is captured by the sensor. The outgoing and incoming signals are compared with the built-in reference cell. If methane is present along the laser path, the laser light is partially absorbed. An algorithm calculates the gas concentration in ppm×m (parts per million multiplied by meter). The value is instantly transferred to the remote control (RC) of the drone pilot and to UgCS software.

Software package for Methane detector integration.

Includes firmware for SkyHub on-board computer and companion application for UgCS.

Supports Laser Falcon and Pergam LMC detectors.

Requires UgCS SkyHub and UgCS license.

The LMC Process software is intended to process the data files created with the Laser Falcon and Pergam LMC methane detectors.

Data processing it simple and straightforward: open the data file created on SkyHub onboard computer and you will see measurements graph, list of detected leaks and map.

Only one of its kind training to learn how to use Laser Falcon methane detector for drone surveys.

Students should have the knowledge and practical experience covered by training:

UgCS Basics
UgCS AreaScan and True Terrain Following Missions
Can be provided at the SPH Engineering office or using video conferencing software.

Duration: 2 days.

The price is for a group of up to 4 students.

Mountings to fix the Laser Falcon methane detector on the leg of the DJI drone.

Cable to provide power from UgCS SkyHub to SENSYS MagDrone R3 magnetometer eliminating the need for an additional battery.

Especially convenient when used in combination with a DJI M300 RTK drone with hot-swappable batteries.

The cable has an XT30 plug connector for the UgCS SkyHub side and a connector for the MagDrone R3 side.

Note that the output power selector on SkyHub should be set to 12V to provide power for MagDrone R3.

Compatible with DJI M300 and M600 drones.

MagDrone R3 mount consists of two interlocked parts – straight and angled. The straight part is meant for the leg of M300/M600, the angled part – for the MagDrone boom.

Price for the pair of mountings.

Cable to feed Geonics EM61Lite from the payload power connector of SkyHub 3rd generation.

Connectors:

- XT30 for the SkyHub

- MS3112E8-3P for EM61Lite

Cable to connect UgCS SkyHub 3rd generation to DJI M210/M210 V2/M210 V2 RTK drone.

Connectors:

- Molex 90123-01304 3-pin receptacle for the drone
- Switchcraft W16982-7SG-P-518 connector for SkyHub

Cable to connect UgCS SkyHub 3rd generation to DJI M300 RTK drone.

The cable has 2 connectors for the UgCS SkyHub:
- XT30 socket connector (power)
- Switchcraft W16982-7SG-P-518 connector (signal)

Cable to connect UgCS SkyHub 3rd generation to DJI M600Pro drone.

Also suitable for custom drones with DJI A3 autopilots.

Connectors:

- Switchcraft W16982-7SG-P-518 for SkyHub side

- Molex 90123-01304 4-pin receptacle for A3 side