Protective/storage/transportation box for UgCS SkyHub, altimeter and cables.
Size and weight: 31 x 27 x 14 cm, 1.8kg (empty weight).

UgCS SkyHub is an onboard computer to log geotagged data from various sensors like GPR, altimeter, magnetometer, and methane detector.

True Terrain Following kit for DJI drones contains everything necessary to fly DJI drones at extremely low altitudes over terrain with high precision:
software,
hardware,
training.

Allows the drone to follow the terrain with very high precision at low altitude using an altimeter sensor - True Terrain Following.

Consists of:

software,
radar or laser altimeter,
all necessary mountings and cables.
Requires UgCS SkyHub on-board computer and UgCS ground control software.

Obstacle detection system for DJI M300 RTK drone, includes sensor, mountings and software support.
Detects obstacles in front of the drone at far distances, range is up to 40m.

Zond Aero 500 GPR plus all required components and software for use with DJI M300 and M600 Pro drones (drone not included).
Recommended additional item: cart for terrestrial surveys.

Zond-12e Drone 500A GPR plus all required components and software for use with DJI M600 Pro drones (drone not included).

Lightweight GPR system, suitable for medium-sized drones like DJI M300 RTK.
Includes a transportation box and mountings for the DJI M300 RTK or DJI M600 Pro drone.

Lightweight GPR system, suitable for medium-sized drones like DJI M300 RTK.
Includes a transportation box and mountings for the DJI M300 RTK or DJI M600 Pro drone.

Includes transportation box and mountings for the DJI M600/M600 Pro drone.
Custom mountings are available by request.

Compatible with systems:
Zond Aero 500/1000
Zond-12e Drone 500A/1000A GPR

EchoLogger ECT D052S dual-frequency echo-sounder plus all required components and software for use with DJI M300/M600 drones (drone not included).

Echo sounder combo: ECT 400S single-frequency

EchoLogger ECT 400S single-frequency echo-sounder plus all required components and software for use with DJI M300/M210/M600 drones (drone not included).

EchoLogger ECT 400S echo sounder with tilt and temperature sensor, harness, housing, and mountings for the drone.

HS Code: 90158040 (hydrographic instruments)

Comes with an RS232 interface and connector for UgCS SkyHub.

Cable length 2.5m.

EchoLogger ECT D052S dual-frequency echo sounder with tilt and temperature sensor, harness, housing, and mountings for the drone.

HS Code: 90158040 (hydrographic instruments)

Comes with an RS232 interface and connector for UgCS SkyHub.

Cable length 2.5m.

Laser Falcon is sensitive only to methane, so no false readings of other gases are possible. It is a class 3R eye-safe laser.

The concept is based on Infrared Absorption Spectroscopy. The laser emits light (spectral range of 1,65 μm), which reflects back and is captured by the sensor. The outgoing and incoming signals are compared with the built-in reference cell. If methane is present along the laser path, the laser light is partially absorbed. An algorithm calculates the gas concentration in ppm×m (parts per million multiplied by meter). The value is instantly transferred to the remote control (RC) of the drone pilot and to UgCS software.

Extra-lightweight GPR system, suitable for medium-sized drones like DJI M300 RTK.

Comes with 3x sets of dipoles for the 300, 150, and 75Mhz.

Utilizes Real Time Sampling (RTS) with high hardware stacking, delivering high-resolution low-noise data.

HS Code: 90158020 (meteorological, hydrological, geophysical instrument)

Please note that additional components and software must be ordered to use this GPR with drones. It is recommended to order a complete set.

Zond Aero LF ground penetrating radar plus all required components and software for use with DJI M300 and M600 Pro drones (drone not included).

Zond Aero 500 GPR plus all required components and software for use with DJI M300 and M600 Pro drones (drone not included).

Recommended additional item: cart for terrestrial surveys.

Low-frequency GPR system with 3 antenna options:

SE-40: 52MHz
SE-70: 80MHz
SE-150: 124MHz
Includes a transportation box and mountings for the DJI M600 Pro drone.

HS Code: 90158020 (meteorological, hydrological, geophysical instrument)