Cable to connect UgCS SkyHub 3rd generation to Telem port of Pixhawk autopilot.

Connectors:

- Switchcraft W16982-7SG-P-518 for SkyHub side

- JST 6-pin receptacle for Pixhawk side

Cable to connect devices (like Geonics EM61Lite) with an RS232 interface to SkyHub 3rd generation.

Connectors:

- D-SUB male 9-pin connector for the device
- Switchcraft W16982-7SG-P-518 connector for SkyHub

Cable to connect UgCS SkyHub 2nd generation to DJI M600Pro drone.

Also suitable for custom drones with DJI A3 autopilots.

Connectors:

- Lemo FGG.0B.303 for SkyHub side

- Molex 90123-01304 4-pin receptacle for A3 side

Cable to connect UgCS SkyHub 2nd generation to DJI M300 RTK drone.

The cable has 2 connectors for the UgCS SkyHub:
- XT30 socket connector (power)
- Lemo FGG.0B.303 connector (signal)

Cable to connect UgCS SkyHub to the power output connector of the drone to consume electricity from the drone's main battery.

Compatible with UgCS SkyHub of 2nd and 3rd generations.

Used with DJI M600 and M210 series of drones.

Connectors:
- XT30 socket for SkyHub side
- XT30 plug for drone side

Plastic 3D printed mountings to fix Nanoradar NRA24 radar altimeter on DJI M300 RTK drone.

Mountings for Nanoradar NRA24 radar altimeter for DJI M600 Pro drone for the case of payload on the ropes to prevent blocking of altimeter beam by swinging payload.

This clip is used with most of the mountings.

Data cable to connect UgCS SkyHub 3rd generation to LightWare SF30/D rangefinder (altimeter).

Connectors:

- Switchcraft W16982-7SG-P-518 for SkyHub side

- Molex Pico-Lock 504051 7-pin receptacle for rangefinder side

Plastic 3D printed mountings to attach LightWare SF30/D laser altimeter to DJI M300 RTK drone.

Extra-lightweight GPR system, suitable for medium-sized drones like DJI M300 RTK.

Comes with 3x sets of dipoles for the 300, 150, and 75Mhz.

Utilizes Real Time Sampling (RTS) with high hardware stacking, delivering high-resolution low-noise data.

HS Code: 90158020 (meteorological, hydrological, geophysical instrument)

Please note that additional components and software must be ordered to use this GPR with drones. It is recommended to order a complete set.

Zond Aero LF ground penetrating radar plus all required components and software for use with DJI M300 and M600 Pro drones (drone not included).

Zond Aero 500 GPR plus all required components and software for use with DJI M300 and M600 Pro drones (drone not included).

Recommended additional item: cart for terrestrial surveys.

Low-frequency GPR system with 3 antenna options:

SE-40: 52MHz
SE-70: 80MHz
SE-150: 124MHz
Includes a transportation box and mountings for the DJI M600 Pro drone.

HS Code: 90158020 (meteorological, hydrological, geophysical instrument)